10W Explosion Proof Emergency Light for Oil and Gas Sites
10W Explosion Proof Emergency Light for Oil and Gas Sites is backordered and will ship as soon as it is back in stock.
10W Explosion Proof Emergency Light for Oil and Gas Sites is backordered and will ship as soon as it is back in stock.
Description
Description
10W Explosion Proof Emergency Light for Oil and Gas Sites
The Eco Bright Light Explosion Proof Emergency Light provides reliable backup illumination for hazardous industrial environments. Its dual adjustable LED heads deliver up to 900 lumens of 5000K light for approximately three hours, helping maintain visibility along evacuation routes, process areas and critical work zones during a power failure.
3-Hour Emergency Lighting
Provides extended backup illumination during power outages, emergencies and evacuation procedures.
Dual Adjustable LED Heads
Each spotlight can be aimed horizontally and vertically to illuminate exits, equipment and travel paths.
C1D1 Hazardous Location
Designed for classified industrial locations containing flammable gases, vapors, combustible dust or fibers.
IP66 and NEMA 4X
The sealed corrosion-resistant enclosure supports wet, dusty and demanding indoor or outdoor locations.
Technical Specifications
| Brand | Eco Bright Light |
| Product Type | Dual-Head Explosion Proof LED Emergency Light |
| Emergency Power | 10W |
| Emergency Lumen Output | Up to 900 Lumens |
| Emergency Runtime | Approximately 3 Hours |
| Color Temperature | 5000K Daylight |
| Input Voltage | 120-277V AC |
| Light Heads | Two High-Output Adjustable LED Spotlights |
| Head Adjustment | Horizontal and Vertical Adjustment from 0° to 180° |
| Beam Angle Options | 90° or 120° |
| Hazardous Location Rating | Class I, Division 1, Groups C and D |
| Additional Gas Classification | Class I, Division 2, Groups A, B, C and D |
| Combustible Dust Classification | Class II, Division 1, Groups E, F and G |
| Additional Dust Classification | Class II, Division 2, Groups F and G |
| Fiber and Flyings Classification | Class III Hazardous Locations |
| Ingress Protection | IP66 Wet Location Rated |
| Enclosure Rating | NEMA 4X |
| Impact Resistance | IK10 |
| Emergency Driver | PHENIX Emergency Backup Driver |
| Housing Material | A360 Die-Cast Aluminum |
| Hardware | Corrosion-Resistant Stainless Steel |
| Lens Material | Tempered Glass |
| Overall Width | Approximately 12 in |
| Overall Height | Approximately 12.6 in |
| Fixture Depth | Approximately 6.5 in |
| Enclosure Dimensions | Approximately 11 × 6.7 in |
| Mounting Hole Spacing | Approximately 9.88 in Center to Center |
| Mounting Type | Wall Mount |
| Conduit Entry | Three 3/4-Inch NPT Conduit Hubs |
| Operating Temperature | -4°F to 140°F / -20°C to 60°C |
| Rated Lifetime | Up to 50,000 Hours |
| Standards | UL 844, UL 924, UL 1598, UL 1598A and UL 8750 |
| Certification | ETL Listed |
| Warranty | 5-Year Limited Warranty |
Emergency Lighting for Classified Areas
- Provides up to three hours of illumination after normal power is lost.
- Dual adjustable heads direct light toward exits and critical equipment.
- Class I Division 1 rating supports demanding oil and gas applications.
- Class II ratings support locations containing combustible dust.
- IP66 enclosure protects against dust and powerful water exposure.
- NEMA 4X construction supports corrosive industrial environments.
- IK10 impact resistance helps protect the fixture from physical damage.
- 50,000-hour rated life helps reduce inspection and replacement costs.
Dual Adjustable Emergency Spotlights
The two LED heads can be rotated and aimed independently to illuminate evacuation routes, doors, stairways, valves, control equipment and other high-priority areas. Select the appropriate 90° or 120° optical distribution based on the required coverage and mounting distance.
Hazardous Location Wall Installation
Secure the fixture to a suitable wall using the designated mounting holes. Route the branch-circuit conductors through one of the 3/4-inch NPT conduit hubs, connect line, neutral and ground, install the required seals and gaskets, and then adjust both LED heads toward the required emergency coverage area.
Hazardous-location performance depends on the complete installation, including approved conduit, sealing fittings, chemical sealant, gaskets, fasteners and wiring methods. Installation and testing must be completed by qualified personnel according to the supplied instructions and applicable electrical and life-safety codes.
Oil, Gas and Industrial Safety Applications
Ideal for oil and gas refineries, drilling facilities, petrochemical plants, chemical processing areas, marine facilities, offshore platforms, wastewater plants, fuel storage locations, paint facilities, manufacturing plants and classified evacuation routes.
Explosion Proof Emergency Light | C1D1 Emergency Lighting | Hazardous Location Emergency Light | Oil and Gas Emergency Lighting | Refinery Safety Lighting | Chemical Plant Emergency Light | IP66 Emergency Light | NEMA 4X Lighting | Industrial Backup Lighting | Class I Division 1 Light
Maintain Critical Visibility During Power Failures
Choose Eco Bright Light for three-hour emergency operation, dual adjustable LED heads, C1D1 hazardous-location performance and rugged IP66 protection.
Package Information
| Package Size | 22 × 22 × 8 in |
| Pack Quantity | 1 Emergency Light |
| Package Weight | 24 lbs |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.






