Ships from USA | Fast Shipping Within 24 Hours

Business hour: Mon-Fri: 8:30 am to 5:30 pm

18W Waterproof LED Emergency Driver for Outdoor Lighting

Regular price $98.98
Shipping calculated at checkout.

Expected to ship in 1-2 Business Days

Description

18W Waterproof LED Emergency Driver for Canopy Lighting

18W Constant Output 90-Minute Backup 100-347V Input 170V DC Output Automatic Self-Test

The Eco Bright Light 18W Waterproof Junction Box LED Emergency Driver adds dependable battery-powered operation to compatible commercial LED fixtures. Its integrated junction box, rechargeable battery and self-diagnostic controls automatically provide constant 18W emergency output for at least 90 minutes when normal AC power is interrupted.

18W Emergency Output

Provides higher emergency illumination for compatible canopy lights, wall packs and commercial LED fixtures.

90-Minute Operation

Automatically maintains essential lighting for at least 90 minutes after normal utility power fails.

Integrated Junction Box

The enclosed driver, battery and wiring compartment simplify fixture installation and component protection.

Automatic Self-Testing

Integrated diagnostics perform scheduled monthly and annual tests to verify emergency performance.

Technical Specifications

Brand Eco Bright Light
Product Type Waterproof Junction Box LED Emergency Backup Driver
Emergency Output Power Constant 18W
Input Voltage 100-347V AC, 50/60Hz
Maximum Input Current 200mA
Maximum Recharge Power 12W
Emergency Output Voltage 170V DC
Auxiliary Output 12V DC, 0.17A
Emergency Runtime Minimum 90 Minutes
Recharge Time Approximately 24 Hours
Battery Type Integrated Rechargeable Lithium-Ion Battery
Battery Construction Sealed, Maintenance-Free and Not Field Replaceable
Battery Protection Over-Temperature Protection
Emergency Lumen Calculation Fixture Efficacy × 18W Emergency Output
Emergency Lumen Example Approximately 1,800 Lumens with a 100 lm/W LED Fixture
Fixtures Above 18W Require a Compatible 0-10V Dimmable LED Driver
Emergency Dimmed Load Must Be Reduced to 18W or Less During Emergency Operation
Dimming Control Voltage Emergency DIM Input Must Remain Below 20V DC
Emergency Activation Automatic Transfer When Normal AC Power Fails
Monthly Self-Test Automatic 30-Second Discharge Test Every 30 Days
Annual Self-Test Automatic 90-Minute Discharge Test Every 365 Days
Manual Short Test Press the Test Switch Once for a 30-Second Test
Manual Full Test Press the Test Switch Twice in Sequence for a Full Discharge Test
Charging Indicator Steady Indicator During Normal Charging
Emergency Test Indicator Slow Flashing During Testing or Emergency Operation
Fault Indicator Rapid Flashing or No Indicator During Abnormal Operation
Junction Box Dimensions Approximately 7.95 × 4.96 × 3.28 in
Overall Mounting Length Approximately 9.22 in
Overall Mounting Width Approximately 4.97 in
Conduit Entries 1/2-Inch NPT
Ambient Temperature 32°F to 122°F / 0°C to 50°C
Location Rating Dry and Damp Indoor Locations and Compatible Plenum Spaces
Installation Type Factory or Field Installation in Compatible Grounded LED Fixtures
Supported Wiring Standard Fixture, 0-10V Dimmer, AC Sensor or DC Sensor
Compliance UL 924 and CSA C22.2 No. 141
Energy Compliance California Energy Commission Title 20
Warranty 5-Year Limited Warranty

Integrated Emergency Junction Box Design

  • Constant 18W output provides predictable emergency illumination.
  • Maintains battery-powered lighting for at least 90 minutes.
  • Wide 100-347V input supports commercial electrical systems.
  • Integrated junction box protects the driver, battery and wiring.
  • Multiple conduit entries simplify commercial fixture installation.
  • Automatic transfer activates immediately after AC power failure.
  • Self-testing supports routine emergency-system verification.
  • Factory or field installation supports new and retrofit projects.

Fixture, Dimmer and Sensor Compatibility

The emergency driver connects to the AC input of the fixture's regular LED driver. Compatible wiring configurations support standard LED fixtures, 0-10V dimmers, AC occupancy sensors and DC sensors. Fixtures operating above 18W require a compatible 0-10V driver so emergency operation can reduce the connected load to 18W or less.

Automatic Self-Diagnostics

The integrated self-diagnostic system performs a 30-second emergency test every 30 days and a complete 90-minute discharge test every 365 days. The visible test switch also permits manual short-duration and full-discharge testing while the indicator communicates charging, emergency and fault conditions.

Installation and Safety Requirements

Connect the emergency driver to an unswitched 100-347V AC supply on the same branch circuit as the regular LED driver. Complete all fixture, dimming and sensor wiring before energizing the system. Charge the internal battery for approximately 24 hours before conducting a full-duration emergency test.

The junction-box enclosure is designed to protect the internal emergency components, but the official installation instructions limit the product to grounded, UL-listed indoor fixtures rated for dry or damp locations. Do not use the unit outdoors, in hazardous locations, near gas or electric heaters or inside heated-air outlets. Installation and compatibility testing must be completed by qualified personnel.

Commercial Emergency Lighting Applications

Suitable for compatible LED canopy lights, wall packs, panel lights, troffers, strip lights and other commercial fixtures used in parking structures, covered entrances, warehouses, retail facilities, schools, hospitals and institutional buildings.

18W LED Emergency Driver | Waterproof Emergency Driver | Junction Box Emergency Driver | LED Battery Backup | 90 Minute Emergency Lighting | Canopy Light Emergency Backup | Wall Pack Emergency Driver | 100-347V Emergency Driver | Self Testing Emergency Driver | UL 924 Emergency Driver

Add High-Output Emergency Backup to LED Fixtures

Choose Eco Bright Light for constant 18W emergency output, 90-minute operation, integrated junction-box construction, universal input and automatic self-testing.

Package Information

Package Size 18.5 × 9.84 × 11 in
Pack Quantity 10 Emergency Backup Drivers
Package Weight 34.32 lbs

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.